In TEIDE REFRACTORY SOLUTIONS we offer a wide variety of refractory materials, among them we highlight the products with between 29% and 35% of alumina.
Among these we find the standard refractory bricks manufactured with our qualities:
R.A. : The bricks manufactured with this quality have an alumina content of 29% and a classification temperature of 1.280 °C. You can find them in the following formats:
220 x 110 x 30 mm | 220 x 110 x 40 mm | 220 x 110 x 50 mm | 220 x 110 x 60 mm
DENSO A1: The plates manufactured with this quality have an alumina content of 35 % and a classification temperature of 1,350 °C. You can find them in the following formats:
400 x 400 x 60 mm | 500 x 500 x 60 mm | 600 x 600 x 60 mm
R-40/9-H: Bricks manufactured with this quality have an alumina content of 31 % and a classification temperature of 1,300 °C. They are available in the following sizes:
220 x 110 x 20 mm | 220 x 110 x 30 mm | 220 x 110 x 40 mm | 220 x 110 x 50 mm |
220 x 110 x 60 mm | 220 x 55 x 15 mm | 220 x 55 x 20 mm | 220 x 55 x 30 mm | 220 x 55 x 40 mm |
220 x 55 x 50 mm | 220 x 55 x 60 mm
On the other hand we have pieces for chimney in several geopmetries for example: standard, L-sha
ped, E-shaped, etc.
Finally to be able to join these pieces in the work we have several mortars and putties, among which we emphasize:
MH-940: This mortar is of hydraulic hardening, contains a percentage of cement and has a classification t
emperature of 1,350 °C.
On the other hand we have the MA-940, this mortar is of ceramic hardening, does not contain cement and has a classification temperature of 1,200 °C.
And finally, we also have PYROFIRE, this is a refractory mastic of chemical hardening in contact with air, and reaches a classification temperature of 1,200 °C.
For more information about these products or the rest of the products or services we offer, please contact us.
