ADAPTATION OF THE STANDARD NORM UNE-EN 993.3 FOR CONTROL OF THE GRANULOMETRIES OF THE ALUMINAS OF THE MARKET.
Our technical department has developed a technique to control the different types of alumina on the market, with the aim of improving the quality control of these products. The development of this technique is done by an adaptation of the standard UNE-EN 993.3 (Methods of testing cement, part 1 and part 3), requiring probe Tetmajer […]
MODELLING OF CONFORMED PIECES MADE BY A 3D PRINTER
Recently, the company TEIDE REFRACTORY SOLUTIONS S.L. has acquired a 3D printer, in order to be able to develop models of their best projects, their kiln cars (VMX, VNT2, VTP), walls, etc. The objective of developing models of the pieces let us not only be able to show our technology at fairs but also it […]
RELATION BETWEEN THERMAL SHOCK ANT THE YOUNG MODULE.
Following the line of the previous Posts, where the relation between thermal shock, Young module, were defined : http://goo.gl/2GNvnU (Relation Between Thermal Schock, Young Module and Crushing Strenght of Refractory Materials, 6th November 2012. TEIDE REFRACTORY SOLUTIONS S.L., continues to characterize and improving their qualities. In this case, it has been made a study of […]
TEIDE REFRACTORY SOLUTIONS SL. DEVELOPES REFRACTORY CONCRETES OF FAST SETTING CALLED Q.S.
TEIDE REFRACTORY SOLUTIONS SL. DEVELOPES REFRACTORY CONCRETES OF FAST SETTING CALLED Q.S. ver enlace directo It is known that low temperatures seriously affect the setting time of the refractory concrete so it is needed to wait a long time to remove the molds and formwork. This brings economical damages and breach of the delivery of […]
FLUIDIZED BED BOILER
Fluidized bed boiler combustion consists of developing combustion of a mass of suspension of fuel particles, ashes, etc., which are dispersed by an ascensional combustion air flow. In Fluidized-bed boilers, combustion occurs controlled throughout the home and of recirculation system (cyclone), so the time of permanence of the particles on ignition is far superior to […]
LABORATORY PROCEDURES
We carry on our refractory research, 60 years providing our customers Refractory Solutions for any type of installations. Our laboratory’s people together with our research and development Department (R&D) is continuously performing several tests in our facilities not only to control the consolidated products but also the ones that are still under study to be […]
TEIDE REFRACTORY SOLUTIONS, S.L.: MORE ABOUT ABRASION.
In some of our previous blogs (available in our website: página web), we have already informed about Abrasion’s issue: we have described the procedure for determining the Abrasion resistance as well as the results obtained under conditions of the standard UNE EN ISO 10545-6:1998 Norm: A) Blog date 11/09/2012: “Teide Refractory Solutions, SL.: expert in […]
TEIDE REFRACTORY SOLUTIONS, S.L. SPECIALIZED IN THERMO-DESTRUCTORS OF VAPORS AND OXIDATION OF WASTE WATER AT HIGH TEMPERATURES FOR PROCESSING INDUSTRIES OF FATS AND ANIMAL SUB-PRODUCTS.
With over more than 20 years of experience in this sector, after having developed and participated in engineering procedure, supply and assembling refractory linings in more than 10 Nationals plants,, TEIDE REFRACTORY SOLUTIONS, S.L., is specialized in installations for Processing Industries of fats and Animal sub-products. Our R+D Department, together with the collaboration of our […]
TEIDE REFRACTORY SOLUTIONS, S.L.: SUCCESFULLY RENEWS ITS QUALITY CERTIFICATION ISO 9001:2008
One of the main objectives of TEIDE REFRACTORY SOLUTIONS, S.L. is the constant improvement of the quality of its products. To do this, from our laboratory, several of essays and analysis are carried daily, over each produced set, over each pressed piece, over each extruded block. Periodically, we send samples of our products to different […]
TEIDE REFRACTORY SOLUTIONS, S.L.: HAS CAREFULLY STUDIED THE OXIDATION OF NON SHAPED OF SILICON CARBIDE-BASED REFRACTORIES.
TEIDE REFRACTORY SOLUTIONS, S.L. has developed a set of recipes with the main property of oxidation reducing. After several years of research and based on our experience in the application of refractory concretes with low and ultra low ciment content to be vibrated and gunited, has as a result the adequacy of these concretes to […]
IMPORTANCE OF PERMANENT LINEAR VARIATION IN NOT SHAPED.
TEIDE REFRACTORY SOLUTIONS, S.L. and his customers know that, the firing of Unshaped Refractories is perfomed at first start up of the facilities until reaching the operating temperature. In this first phase, the refractory (Concretes, Ramming Masses, Plastics Masses, etc.), undoubtedly suffer variations in its dimensions; these variations, that remain after cooling, depend on several […]
TEIDE REFRAFACTORY SOLUTIONS S.L.: EXPERT IN “ANTIABRASIVE” PRODUCTS.
Every day is higher the necessity of fighting against abrasive inconveniences generally on tooling manufacturing and in particular: CERAMIC INDUSTRY: Extrusion Nozzle and Body / Hoppers. CEMENT WORKS: Ducts of Dust / Material Jet / Redlers / Cyclone Separators. PETROCHEMICAL: Humidification of ash / Pump housings, Cyclones… / Butterfly valves. CARBON: Mills / Transportation of […]