Contact

Category: Glass

TEIDE REFRACTORY SOLUTIONS, S.L.: SUCCESFULLY RENEWS ITS QUALITY CERTIFICATION ISO 9001:2008

In 2015, Teide Refractory Solutions, exceeds favorably, demands that the Quality Management System (indicated in ISO 9001: 2008) requires. Demonstrates a continous improvement in the aplication of the requirements imposed by ISO 9001:2008 Norm. Has a well-defined Sistem of identifiers and indicators for quality control. Has succesfully established quality objectives for each of its production […]

BALANCES THERMAL, IMMEDIATE SAVING

TEIDE REFRACTORY SOLUTIONS opens a new line of services in order to optimize the tunnel kilns. TEIDE has arranged two engineers for this purpose, and the objective is clear, to give added value to the company, making heat Balances of furnaces customers. It can thus be detected in what points of balance (sensible heat load, […]

DEVELOPMENT OF MH-60 SLY, MATERIAL SUITABLE FOR SPECIAL MECHANICAL ENQUIRIES.

The Technical Department of TEIDE REFRACTORY SOLUTIONS continues to innovate in its materials, this time it has developed a material suitable for mixing with lots of Steel Fibers. The developed product has been called MH-60 SLY; it acquires the optimal properties when mixing with 20% in weight (16% in volume) of Steel Fibers. The use […]

TESTS OF SOFTENING UNDER LOAD AND COMPRESSIVE CREEP OF QUALITIES R-COR.PI-FO AND R-COR-PO-FO, AS PER EN-ISO 1893:2008 AND UNE-EN 993-9 NORMS.

The Technical Department of TEIDE REFRACTORY SOLUTIONS S.L. continues to undertake trials in order to characterize their materials accurately and to give to our customers a specific solution for each situation. In this matter has developed, (following previous post) the creep in compression according to the actual legislation as per UNE-EN 993-9 Norm, with the […]

TEIDE REFRACTORY SOLUTIONS S.L. APPLIES HEATEIDE AND STEIDE MODULES TO SOLVE BREAKING PROBLEMS OF FRACTURE INTO THE PIECES SUBJECTED TO PRESSURE AND TEMPERATURE.

The Technical Department of TEIDE REFRACTORY SOLUTIONS S.L. has recently been receiving its first results after the implementation of the simulation process. The case submitted under study, took place into the failure in service of the plates, as we shown as follows: Breaking Zone These pieces are subjected to a concrete thermal treatment, reaching a […]

MODELLING OF CONFORMED PIECES MADE BY A 3D PRINTER

Recently, the company TEIDE REFRACTORY SOLUTIONS S.L. has acquired a 3D printer, in order to be able to develop models of their best projects, their kiln cars (VMX, VNT2, VTP), walls, etc. The objective of developing models of the pieces let us not only be able to show our technology at fairs but also it […]

RELATION BETWEEN THERMAL SHOCK ANT THE YOUNG MODULE.

Following the line of the previous Posts, where the relation between thermal shock, Young module, were defined : http://goo.gl/2GNvnU (Relation Between Thermal Schock, Young Module and Crushing Strenght of Refractory Materials, 6th November 2012. TEIDE REFRACTORY SOLUTIONS S.L., continues to characterize and improving their qualities. In this case, it has been made a study of […]

LABORATORY PROCEDURES

We carry on our refractory research, 60 years providing our customers Refractory Solutions for any type of installations. Our laboratory’s people together with our research and development Department (R&D) is continuously performing several tests in our facilities not only to control the consolidated products but also the ones that are still under study to be […]

TEIDE REFRACTORY SOLUTIONS, S.L.: MORE ABOUT ABRASION.

In some of our previous blogs (available in our website: página web), we have already informed about Abrasion’s issue: we have described the procedure for determining the Abrasion resistance as well as the results obtained under conditions of the standard UNE EN ISO 10545-6:1998 Norm: A) Blog date 11/09/2012: “Teide Refractory Solutions, SL.: expert in […]