Blog

WORLD LEADER IN THE CERAMIC REFRACTORY INDUSTRY.

18/12/2012 Teide

From more than 40 years, is bringing to their customers offers for a wide range of products and setting up services to provide solutions for any type of red ceramics furnace.

The efficient technology of Low Termal Mass for the manufacture of Hollow Bricks, Roof tiles, and Bricks has positioned TEIDE REFRACTORY SOLUTIONS, S.L., as a world leader with more than 300 facilities around the world.

Among the main advantages that TEIDE kiln’s car bring in their technology we remark:

  • Lower Thermic Conductivity in comparison to other traditional solutions.
  • Low Thermic Mass: we are able to reduce between 30-40 % of the weight in comparison to traditional solutions.
  • Significantly Save up of Energy: our solution allows to decrease between 5-15% the energy comsumption depending on each installation.

TEIDE is the only provider able to offer the maximum of technological combinations in solutions for Low Mass Termal (Pressing, Extrusion, Casting) kiln cars, this allow us adapting our technology not only to all kinds of applications but also adjusting to multiple budgets.

1) VTP PRESSED

  • All Pressed.
  • Maximum Durability.
  • Maximum Mechanical Resistance ; ( recommended to support large loads per m² ) .

2 ) VEX EXTRUDED

  • All Extruded except pressed corners
  • Light.
  • Economic.

3) VMX MIXED: TOP COMPANY’S SALES

  • Lower Extruded Perimeter, Pressed Corners, combined Extruded and Pressed Deck Blocks.
  • Optimization of the technologies: VTP PRESSED + VEX EXTRUDED.
  • Optium balance with regard to: Weight – Price – Quality.

4 ) VTR DRIED

  • All Extruded except pressed corners.
  • Optimal Ventilation of the charge.
  • Ideal Balance: Quality – Price.
  • Minimum Energy.Consumption.
  • Recommended for charge-in-green.

5 ) VVE RAPID DRIED:

  • Optimal Ventilation of the charge.
  • Ability to withstand extremly low cycles (< 12h)
  • Minimum Energy.Consumption.
  • Recommended for charge-in-green.

6) VNT/2 NEW TECHNOLOGY:

  • All Extruded without Deck Blocks except Pressed Corners
  • Minimum Energy Consumption.
  • Insultating core.
  • Is the MOST ECONOMICAL CHOICE

COMPARATIVE OF ALL TEIDE REFRACTORY SOLUTIONS. S.L. KILN’S CAR TECHNOLOGIES..

  • Refered to a kiln’s car height solution of 320 mm

Tell us what you need will bring you an optimun solution maintaining and ideal balance with regard to price / quality.